Saturday, May 19, 2018

Update from Bowser: SD40, GP9, RS3













Since I’ve been talking about manufacturers, here’s an update from Bowser.

Lee English sent a note saying that the SD40 tooling is finishing this month (May).

The GP9 tooling is ordered for delivery of the molds later this year. The announcement of road numbers will be made at the NMRA convention this summer. 

Lee says he is making the making CN version first, followed by CP followed and then CN with slug.

He says “a lot of research has been done on the SD30c ECO. This is for next year.”

The American RS3 project is still be tooled, he says, adding “I will be happy when this is done.”

Once the U.S. version of the RS3 is out, “I will be working on other versions,” he says. “I hope to do a CP chop nose, but it will be two years.”

He adds that “I have to make some stuff for the U.S. market. I am hitting your [Canadian] pocket books very hard.”

He concludes by saying “I really appreciate your support for my toys.”

New Canadian Model Railroad Manufacturer














There’s a new manufacturer of Canadian model railroad locomotives pulling into the station: Shira Trains.

And it's first model is the CPR's venerable D-10 steam locomotive.

Since I'm always happy to see another manufacturer of Canadian model railroad items—especially one located in Canada—I contacted them to learn more.

I discovered the company is owned by Stanley Butler and two silent partners. It was started two years ago. 

I asked him about the name. Where did it come from?

The name is taken from Shiraichi, he says, a Japanese train station he visited when very young. He still has fond memories of it.













I asked about the business itself; when did it start?

Stanley told me although Shira Trains was conceived two years ago, the main business of the company, which is located in Ontario, is steel manufacturing. It  has been running since 1984.

I then asked about its first model: An HO scale CPR D-10. Why make that one?

The first reason, Stanley, says, is because he wanted one.

“This project was originally for myself, so if they sell great, if not, that's okay too,” he says of the model.

The other reason is potential demand; he says there has never been a good plastic model of a D-10.

"That was also an indicator that it may be needed in the industry,” he says of the model, which they are planning to release this year.



















I pointed out that Rapido is also planning to bring out a D-10 next year. Did he think it was wise to bring out a similar model about the same time?

“I am sure that Rapido’s [model] will be a masterpiece, but I don't need all the fiddly bits,” he says.

As for Shira’s model, according to the company’s Facebook page the bottom of the boiler will be solid die-cast, placing the weight evenly over the drive gears. Altogether, the unit will weigh over 16 ounces.

The locomotive will be available in DC and DCC with sound. The cost will be $349 is for DC/DCC/sound models. 

As for other models, Stanley says “while we have acquired tooling from another vendor, I think it best to stick with one at a time.”

When does he expect it to be available?

The order to make the units “has already been placed,” he says, adding “as soon as we get the running samples we will concentrate on sales. We are only making are limited amount of them.”

The model will be offered in three variants.
















D-10h #1057, includes short light. Optional parts include smoke deflector, pilot step, extra sand dome, grease, extra gear, operating tender coupler, instructions, bell wire.

D-10h #1095, includes long light and smoke deflector. Optional parts include pilot step, extra sand dome, grease, extra gear, operating tender coupler, instructions, bell wire.

D-10h #1100, includes short light and front step. Optional parts include: smoke deflector, extra sand dome, grease, extra gear, operating tender coupler, instructions, bell wire.










All units are now available for pre-order on the company's Facebook page. 

About the D-10: The CPR made over 500 of these classic 4-6-0 ten-wheelers between 1905-13.  They served all over Canada until the end of steam. It was known as a sturdy, reliable and versatile locomotive suitable for both freight and passenger service.

More photos of D-10 units can be found at Old Time Trains.

Sunday, May 13, 2018

Extreme Model Railroad and Contemporary Architecture Museum Proposed

















What kind of layout could be built for $65 million?

We’re about to find out; that’s how much will be spent to create the Extreme Model Railroad and Contemporary Architecture Museum in North Adams, Mass.

The museum, which is to be a celebration of notable modern architecture, will be designed by architect Frank Gehry.













The plan calls for a 83,000-square-foot museum that features model trains running past scale models of buildings by notable architects including Louis Sullivan, Frank Lloyd Wright and Gehry.

According to an article in Architect News, the 670-foot long gallery will include 164 buildings by 71 international architects constructed at 1:48 scale (O guage). Twelve lines will run among the buildings.

Iconic structures that will be included will be the Seagram Building in Manhattan, the Brooklyn Bridge, Fenway Park, the Empire State building and the One World Trade Center, which will be 40 feet tall. 












The trains and buildings will also be surrounded by video-projected landscaping blending the physical models into a seamless background.

It will be built on publicly-owned land overlooking a disused rail freight yard

The projected opening date is 2021. Start making your travel plans now!


Read more about the project here.